Picture Adjustment - Emerson LC320EM8 Owner's Manual

PICTURE ADJUSTMENT

You can select from four default picture color set-
tings. You can also adjust brightness, contrast,
color, tint, sharpness and color temperature as well
as energy saving settings.
SETUP SETUP
BACK
1
Display the setup screen.
• Press [SETUP].
The following setup screen appears.
2
Select "PICTURE", and press [ENTER] to con-
firm.
• Using [ K / L ], select your desired item and
press [ENTER] to confirm.
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.
Energy Saving
3
Adjust the picture quality.
• Using [ K / L ], select the picture quality you want
to adjust.
Picture Mode
Using [ K / L ], adjust Picture Mode from the
selection, then press [ENTER]. (Standard,
Dynamic, Movie, News and Manual)
Picture
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.
Energy Saving
Brightness
Using [s / B], adjust until the darkest parts of
the picture are as bright as you prefer.
s : To decrease brightness
B : To increase brightness
Brightness 30
Adjust
24
EN
SCREEN
MODE
ENTER ENTER
INFO
Dynamic
30
60
36
0
0
Neutral
Off
Standard
Dynamic
Movie
News
Manual
Move Enter
ENTER
Contrast
Using [s / B], adjust to increase or decrease
contrast.
s : To decrease contrast
B : To increase contrast
Contrast 60
Adjust
Color
Using [s / B], adjust to be brilliant or pale color.
s : To pale
B : To brilliant
Color 36
Adjust
Tint
Using [s / B], adjust to obtain natural skin tones.
s : To red
B : To green
Tint R2
Adjust
Sharpness
Using [s / B], adjust the detail of the picture.
s : To soft
B : To clear
Sharpness 0
Adjust
Color Temp.
Using [ K / L ], adjust Color Temperature from the selec-
tion, then press [ENTER]. (Cool, Neutral and Warm)
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.
Energy Saving
Energy Saving
Using [s / B], adjust brightness of backlight.
s : To bright
B : To dark
Energy Saving Off
Adjust
• The adjustment bar for picture quality item is
displayed on the screen.
NOTE:
• To cancel the picture adjustment, press [SETUP].
4
To exit the setup, press [SETUP].
Move Enter
ENTER
Move Enter
ENTER
Move Enter
ENTER
Move Enter
ENTER
Cool
Neutral
Warm
Enter
ENTER