Applicaiton - Planet IGS-801T User Manual

3. APPLICAITON

In this paragraph, we will describe how to install Industrial Gigabit
Ethernet Switch and the installation points for the attention.
Human Management Interface
SGSW-24040
IGS-501
ROBO T
Robot
I/O Devices
Field Automatic
Device
Installation Steps
Step 1: Unpack the Industrial Gigabit Ethernet Switch.
Step 2: Check the DIN-Rail is screwed on the Industrial Gigabit
Ethernet Switch. (Please refer to DIN-Rail Mounting section
for DIN-Rail installation If the DIN-Rail is not screwed on the
Industrial switch). If you want to wall mount the Industrial
Gigabit Ethernet Switch, then please refer to Wall Mount Plate
Mounting section for wall mount plate installation.
1
10/100/1000Base-T Ethernet
Cat5,6 UTP/STP Cable
IGS-801
PC
Distribute I/O
Control System
Field Automatic Field Automatic
Device
Data Collect Server
IGS-801T
Serial Device
Server
Field Automatic
Device Device
IGS-501T
PC
Distribute I/O
Control System
100Base-TX UTP
1000Base-T UTP