Using The Wps Button - Samsung UN75F8000XZA E-Manual

51
IP Settings
From the
Gateway, and the
IP Settings
IP Setting
IP Address
Subnet Mask
Gateway
DNS Setting
DNS Server
OK
61
The TV attempts to connect to the network again using the specified settings. A confirmation
message is then shown once a connection is established. Select

Using the WPS Button

If the router has a WPS push button, you can use it to connect the TV to the router automatically. WPS
automatically configures the SSID and WPA key settings.
11
Network type
Setting
21
WPS(PBC)
Select
31
The TV automatically acquires the SSID and security key settings and connects to the network. A
confirmation message is then shown once a connection is established. Select
IP Setting
screen, set
DNS Server values, and then select OK.
Enter manually
0.0.0.0
0.0.0.0
0.0.0.0
Enter manually
0.0.0.0
Cancel
Wireless
to automatically displays a list of available wireless networks.
and then press the router's WPS button within two minutes.
Enter manually, enter
to
IP Address, Subnet
OK
to proceed.
OK
to proceed.
Mask,