Gigaset SX763 User Manual page 50

Security Setup Wizard
Manual key entry
ì
Select the Key type, Hex or ASCII.
If you select Hex as the key type you can use the characters 0 to 9 and A to F.
– With a 64-bit encryption depth, the key is 10 characters long.
– With a 128-bit encryption depth, the key is 26 characters long.
If you select ASCII as the key type, you can use the characters 0 to 9, A to Z, a to z
plus the special characters in the ASCII character set.
– With a 64-bit encryption depth, the key is 5 characters long.
– With a 128-bit encryption depth, the key is 13 characters long.
ì
Confirm the key by entering it again in the Confirm key field.
Generating a key by means of a Passphrase
ì
Enter a Passphrase (up to 32 characters) and confirm it by entering it again. The key
is generated automatically.
Note:
u
It is very important that you make a note of the key or passphrase. You will need
this information to configure the wireless network adapters properly.
u
You have to change the WEP encryption in the wireless network adapters for the
connected PCs in the same way, otherwise they will not be given access to the
Gigaset SX763 WLAN dsl wireless network.
ì
To go to the next step, click Next >
50