Settings For Display Video On Hdmi - Toshiba Satellite U840 Series User Manual

Hide thumbs Also See for Satellite U840 Series:
Table of Contents

Advertisement

1. HDMI out port
Please connect or disconnect an HDMI display device to or from the
computer under the following conditions:
Do not do so when the computer is in Sleep Mode or Hibernation Mode.
When you connect a television or external monitor to the HDMI port, the
display output device is set to HDMI.
When you unplug the HDMI cable and re-plug it, please wait at least 5
seconds before you re-plug the HDMI cable again.
When you change the display output device by hot key, the playback
device may not switch automatically. In this case, in order to set the
playback device to the same device as the display output device, please
adjust the playback device manually by the following steps:
1. Click Start -> Control Panel -> Hardware and Sound -> Sound.
2. In the Playback tab, select the playback device which you want to
switch to.
3. To use the internal speakers on your computer, select Speakers. To use
the television or the external monitor that you have connected to the
computer, select a different playback device.
4. Click the Set Default button if it is available.
5. Click OK to close the Sound dialog.

Settings for display video on HDMI

To view video on the HDMI display device, be sure to configure the
following settings otherwise you may find that nothing is displayed.
Be sure to use the HotKey to select the display device before starting to
play video. Do not change the display device while playing video.
Do not change the display device under the following conditions.
User's Manual
Figure 3-8 Connecting the HDMI out port
2
The computer is turned on.
The computer is completely turned off.
While data is being read or written.
1
2. HDMI cable
Satellite U840/U800 Series
3-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite u800 series

Table of Contents