Vauxhall Meriva Owner's Manual page 149

Hide thumbs Also See for Meriva:
Table of Contents

Advertisement

Control indicator v
The w arning light lights up for a few
seconds when ignition is switched on. Once
it goes out, the system is ready for
opera tion.
Flashing during driving:
This shows the system has com e into
action. The engine output may be reduced
(the sound of the engine cha nges) a nd the
vehic le ma y be braked automatically to a
small degree.
Illum inates while driving:
Fault in the sy stem. Driving ca n be
continued. Poor road surface conditions
may however still cause vehicle stability to
be im paired.
Have the ca use of the fault eliminated.
Self-diagnosis integrated into the sy stem
allow s rap id fault identification.
Driving and o peration
Illuminates after interruption of power
supply e.g. after disconnecting battery .
After a power supply interrup tion the
steering angle sensor must be calibrated to
ma ke the system operational:
z Automatic calibration d riv ing in straight
line at constant slow 12 to 25 mph
(20 to 40 km/h) speed on level, dry road .
z Manual calibration by turning steering
wheel from limit position to limit position.
If the indicator lamp d oes not go off after
successful calibration, observ e notes in
midd le column.
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 meriva

Table of Contents