Exif Print; Power Requirements; About Consumables; Safety Precautions - Canon PIXMA MX300 Quick Start Manual

Exif Print

This machine supports ExifPrint.
Exif Print is a standard for enhancing the communication between digital cameras and
printers. By connecting to an Exif Print-compliant digital camera, the camera's image
data at the time of shooting is used and optimized, yielding extremely high quality
prints.
International

Power Requirements

Be sure to use the power cable included with the machine. Never use a power supply
voltage other than that supplied in the country of purchase. Using the incorrect voltage
could cause a fire or electric shock. The correct power supply voltages and frequencies
are as follows:
AC 100-240V, 50/60Hz

About Consumables

Consumables (ink tanks / FINE Cartridges) are available for 5 years after production
has stopped.
* Approximately 3 seconds per page fax transmission time based on Canon FAX
Standard Chart (Standard Mode) at 33.6 Kbps modem speed.
The Public Switched Telephone Network (PSTN) currently supports 28.8 Kbps modem
speeds or lower, depending on telephone line conditions.

Safety Precautions

Warning
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor.
Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands
are wet.
Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects
on the power cord.
Never use any power supply other than the standard power supply available in the country of purchase.
Using the incorrect voltage and frequency could cause a fire or electric shock.
Always push the plug all the way into the power outlet.
Caution
For safety reasons, store FINE Cartridges out of the reach of small children.
Do not drop or shake FINE Cartridges as this may cause the ink to leak out and stain your clothes and
hands.
.
Also read the Safety Precautions in the User's Guide on-screen manual. Observe the warnings
and cautions to avoid personal injury or damage to the machine.
2 Introduction
E S ®
NERGY TAR Program
E S
As an NERGY TAR
E
product meets the NERGY
Super G3 is a phrase used to describe the new generation of fax
machines that use ITU-T V.34 standard 33.6 Kbps* modems.
Super G3 High Speed Fax machines allow transmission time of
approximately 3 seconds* per page which results in reduced
telephone line charges.
®
Partner, Canon Inc. has determined that this
S ®
TAR guidelines for energy efficiency.