Contents Introduction Introduction ....................2 Thank you for purchasing this Cambridge Audio Azur 651C CD player. Like all Cambridge Audio products, the 651C adheres to our three core principles – stunning performance, ease of use and incredible value. Important safety instructions ..............3 Developed as part of our on-going research and development regime, Limited warranty..................4...
(2009/125/EC) Directives when used and installed according to this the apparatus. instruction manual. For continued compliance only Cambridge Audio 11. Only use attachments/accessories specified by the manufacturer. accessories should be used with this product and servicing must be referred to qualified service personnel.
Cambridge Audio product, Positioning it can be returned by your dealer to Cambridge Audio or an authorised Cambridge Audio service agent. You will need to ship this product in either Choose the installation location carefully. Avoid placing it in direct sunlight its original packaging or packaging affording an equal degree of or close to a source of heat.
Please ask you dealer for details. looped out of the Control Bus. Refer to the ‘Custom Installation’ section for more information. * For more information, see the DacMagic page on the Cambridge Audio website: www.cambridgeaudio.com/products.php...
Front panel controls Standby/On Display functions Switches the unit between On and Standby mode. The blue LED will remain bright when the unit is on, becoming dim when the unit is in a special eco-friendly standby mode. The unit consumes less than one watt of power during standby.
Please note that the following buttons will only operate Un-pairing – To un-pair an Apple device, press and hold a matching Cambridge Audio Azur amplifier: any of the source buttons along with the button for six seconds.
Operating instructions Loading and unloading discs 1. Press the Open/Close ( ) button. 2. When the disc tray has opened fully, place a disc carefully in the tray with the label side facing up. 3. To close the disc tray, press the Open/Close ( ) button again. When the tray, with a correctly loaded disc, is fully closed the CD player will Alternatively, press Repeat ( ) twice, select the chosen track using read the disc and display the content information.
Page 9
azur 651C Programming disc play 9. You can use the Skip/Scan ( ) buttons on your remote control to move through your programmed selection in the same way as normal It is possible to program the 651C to play back in any order only the tracks playback.
Filter settings The 651C use the WM8742 Digital to Analogue Converter (DAC) from Wolfson Microelectronics. The 651C has two DACs in dual differential (i.e. one per channel, in an internally balanced mode). These very high quality parts allow a range of filters to be selected. There is no ‘right’ choice and we encourage you to experiment with the filters and pick the one that is best to your ears.
Off” command is generated. In the event that the above solutions do not remedy your problem, please A full code table for this product is available on the Cambridge Audio consult our frequently asked questions (FAQ) section on our website: website at www.cambridge-audio.com.