Network Connection; Connection Instruction - Aztech WIPC402 User Manual

AZTECH WIPC402 IP CAMERA USER MANUAL v1.0
The detector should be switched type (always on or always off). If the detector has detected
the smoke or people or animal to enter the area, the detector will switch on or switch off. And
it will send the external alarm signal into the IP camera.

4 Network Connection

IP Camera can be connected with other PC through router, switch or hub to establish a
network. Figure 5 shown connections.

4.1 Connection Instruction

Before visiting the IP Camera, you should firstly connect it to the Network, supply the power
to it, and check if the light of RJ45 Socket is normal to make sure all of the communication
links are fluency. The connection method likes as Figure 5.
1) IP Camera-1 and IP Camera-2 are connected separately to 2 different LANs.
2) And these 2 LANs are already connected to the Internet. In order to get the LANs to be
connected to the Internet, they are required to be equipped with router and to apply for
the communication link from the local Internet Service Provider (ISP) and connect to it by
ADSL or optical fiber, etc.
Input
pins
PIR Power
Figure 4
Figure 5
PIR
Switch
9