System Setting Page; Device Information Checking - Aztech WIPC402 User Manual

AZTECH WIPC402 IP CAMERA USER MANUAL v1.0

7.5 System Setting Page

7.5.1 Device Information Checking

Device ID is set by factory. Every ID is unique
Network Connection status will display "LAN" when connected by wired cable and
display "Wireless LAN" connected by wireless Router.
SD status will remind if SD card inserted and display the free storage capacity. Click
"Browse" to view the contents of the SD card and, "Format SD Card as Fat32" to format
SD Card and, "Unplug SD Card" to stop the operation of SD Card.
The device supports maximum of 32G SD card. Please format the SD card to
FAT32 before using the card on Camera. Please check if the SD Card matches the
camera or not before purchase the SD Card.
Figure 32
28