Visit Ip Camera - Aztech WIPC402 User Manual

AZTECH WIPC402 IP CAMERA USER MANUAL v1.0
Put the user name and password into "Authentication" (By default, the user name
is: admin, password is: admin). Click "Update". The setting will take effect now.
Select the device in list box, click "Browse" button, it will open the Browser
automatically and pop up a window at the same time which requires to inputting the
user name and password. Then you see the home page of the IP Camera-1, just as
below Figure 7.

5.2 Visit IP Camera

If you are using Internet Explorer or compatible browser to visit it for the first time (use other
browsers, please refer to 8.2), you will be required to install the ActiveX before viewing the
video. As Figure 7, click "Download ActiveX (when first use)". The dialog just as Figure 8 will
pop up accordingly. Click "Run", then it will download and install the ActiveX automatically.
After the ActiveX installation, click the "Video View" as Figure 7, then you will enter the video
view home page as below Figure 9.
Figure 7
Figure 8
12