Table Of Contents - Axminster AT1628VS User Manual

Figure 04
Figure 05
Figure 06
3. Lift the lathe bed from the pallet onto a work
bench, see figs 7 then refit the headstock, tool rest
and tailstock as described in steps 1 and 2, see
figure 8
Lathe Stand Assembly (Code: 502705)
1). Locate the two lathe stands (F) and the four feet
(G).Screw the threaded feet into the pre-drilled holes
to the base of the stands. (See figure 9)
b
Assembly Instructions
G
7
Figure 07
Figure 08
A
Figure 09
F
Continues Over...