Micro-adjustable router table fence system (6 pages)
Summary of Contents for Freud DPSDD
Page 1
DPSDD ESTRA IGHT DPSDS INISTRA DPSSD ESTRA IGHT DPSSS INISTRA PCD - P DIRITTE UNTE SPECIALI PCD - S TRAIGHT OUTER > Per la costruzione degli utensili, devono essere forniti i seguenti dati: • Attacco • Tipo di macchina •...
Page 2
Also specify the machine and the conditions of use (RPM and feed rate). • ISPONIBILE A MAGAZZINO PCD - P UNTE MULTITAGLIENTI ELICOIDALI PCD - M ULTICUTTING HELICAL ROUTER BIT • • • • • 18-25 30...
Page 3
66 mm. Velocità di avanzamento: 8 -10 m/min. > Router bits in PCD with HW tip, with 4 principles and 2 cutting edges on all working points for drilling and edging (at medium speed) of hard solid wood (without knots), veneered or coated MDF.
Page 4
(n° giri e avanzamento). > Router bits in PCD with HW, with 2 principles and 1 cutting edge on all working points for drilling and edging of hard solid wood (without knots), veneered or coated MDF.
Page 5
MDF, plastic laminates. Suitable for openings for kitchen sinks. It is possible to construct the router bits with the front tip in PCD. Allowable feed rate: 3 to 4 m/min, depending on the thickness of material to be worked.
Page 6
Indicare inoltre la macchina e le condizioni di utilizzo (n° giri e avanzamento). > Router bits in PCD with 2 cutting edges per bit over and under and one cutting edge at the centre for drilling and edging of MDF and chipboard covered with melamine coating, paper, laminates, plastic and thermoplastic material.
Page 7
MDF grezzo. Adatte per centri di lavoro, "Punto Punto" e macchine per foratura in linea. > Router bits in PCD for making closed holes on coated chipboard and MDF and on unfinished MDF. Suitable for work centres, "Punto Punto" and line drilling machines.
Page 8
MDF grezzo. Adatte per centri di lavoro, Punto Punto e macchine per foratura in linea. > Router bits in PCD for making closed holes on coated chipboard and MDF and on unfinished MDF. Suitable for work centres, "Punto Punto" and line drilling machines.