Table of Contents
Advertisement
NETWORK SETUP
To access NETWORK SETUP, using DOWN or UP button to select the item in MAIN MENU, then press
ENTER into setup menu when NETWORK SETUP is highlighted with blue color. The menu below will appear
on monitor.
1) CONNECT: STATIC / DHCP
Select STATIC or DHCP to set up DVR IP address using LEFT or RIGHT Button.
STATIC: Fixed IP. Directly enter the IP adddree and related items according to user's network topology.
Please make sure to use a vacant IP address for DVR. This will prevent errors from occurring if the IP
address is overlapped. Please consult your MIS personnel to setting the IP address for proper remote
viewing.
DHCP: DVR is automatically assigned an IP address from DHCP server. Each time triplex DVR series
starts up, be sure the DHCP server is setup ready to assign a static IP to your DVR as a DHCP client.
ë
Remote access via web browser or NetViewer utility cann ot
Note
be concurrently. One administrator can be allowed to login.
2) IP ADDRESS, 3) SUBNET, 4) GATEWAY:
If static IP is selected, IP address, subnet mask, and gateway values should be assigned manually,
according to user's network environment. LEFT or RIGHT button is used for item movement, DOWN or
UP button is used for changing the value of parameter.
If DHCP is selected, the DVR should receive network related parameters automatically from DHCP server
and those values will be displayed on IP ADD, SUBNET and GATEWAY item.
NETWORK SETUP
CONNECT
1
2
IP ADD
3
SUB NET
4
GATE WAY
5
DNS
6
PORT
7
NTP TIME
8
TIME ZONE
9
DDNS STATUS
▲ ▼ ◀ ▶
ENTER
: STATIC/ DHCP
: 192. 168. 123. 171
: 255. 255. 255. 000
: 192. 168. 123. 254
: 168.126.063.001
: 5000
:
OFF/ON
: GMT + 08:00
: NONE/OK/ERR
EXIT
25
Advertisement
Table of Contents
