Setting For Digital Output; Automatic Playback Of Dvds - Pioneer AVH-P5250BT Operation Manual

Section
13 Menu operations
2 Touch DivX Subtitle on the Video Setup
menu to select the desired subtitle setting.
! Original – Display the DivX subtitles
! Custom – Display the DivX external subti-
tles
Notes
! Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
! Up to 126 characters can be displayed on one
screen. If more than 126 characters are set,
the excess characters will not be displayed.
Displaying the DivX
registration code
In order to play DivX VOD (video on demand)
content on this unit, the unit must first be re-
gistered with a DivX VOD content provider. For
registration, generate a DivX VOD registration
code and submit it to your provider.
! Keep a record of the code as you will need
it when you register your unit to the DivX
VOD provider.
1 Display the Video Setup Menu.
Refer to Introduction of menu operations on
page 45.
2 Touch DivX VOD on the Video Setup
menu.
Registration Code and Deactivation Code
appear.
3 Touch Registration Code.
Your registration code is displayed.
Displaying the deactivation code
If your device is already activated, deactivate it
by entering the deactivation code.
1 Display the Video Setup Menu.
Refer to Introduction of menu operations on
page 45.
62
En
VOD
Ò
2 Touch DivX VOD on the Video Setup
menu.
3 Touch Deactivation Code.
# To cancel deactivation, touch Cancel.
4 Touch OK.
The deactivation completed.

Setting for digital output

(Function of AVH-P5250DVD)
Audio which is outputted from digital output
of this unit can be selected. Normally, set to
Stream. If this unit's digital output is not used,
there is no need to change settings.
! Selecting Linear PCM enables you to
switch the output channel if playing the fol-
lowing type of discs. (Refer to Selecting
audio output on page 35.)
— Dual mono mode DVD video discs
1 Display the Video Setup Menu.
Refer to Introduction of menu operations on
page 45.
2 Touch Digital Output on the Video
setup menu to select the desired digital
output setting.
! Stream – The Dolby Digital/DTS signal is
output as it is (initial setting)
! Linear PCM – The Dolby Digital/DTS signal
is converted to and output as a linear PCM
signal

Automatic playback of DVDs

When a DVD disc with a DVD menu is in-
serted, this unit will cancel the menu automa-
tically and start playback from the first chapter
of the first title.
! Some DVDs may not operate properly. If
this function is not fully operated, turn this
function off and start playback.
1 Display the Video Setup Menu.
Refer to Introduction of menu operations on
page 45.