SAFETY INSTRUCTIONS ������� ���� �� ����� CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel. ����������� �� ��������� ������� The lightning flash & arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of danger.
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Club VocoPro for Karaoke news and events, chat rooms, club directories and even a KJ Service directory! We look forward to hearing you sound like a PRO, with VocoPro, your ultimate choice in Karaoke entertainment. Please record the model number and serial number below, for easy reference, in case of loss or theft. These numbers are located on the rear panel of the unit.
Now it’s time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Microphone basics Microphone Position The UHF-5805 is ideal for close-up vocals and can be held in the hand or mounted on a mic stand. The most common applications and placement techniques are listed below. Keep in mind that microphone technique is largely a matter of personal taste, and there is no one “correct”...
Before getting started Before starting any installation procedures, it is recommend to completely unpack all the package contents. The original packaging should be kept in the event that re-shipping is needed. Upon unpacking the UHF-5805, you should have received the following items: •...
3. While aligned, use rack case screws (not included) in the order shown below to stabilize the UHF-5805 in its space, using the “X” rotation (numbered below) will ensure even tension and flush alignment.
Getting Connected System Connection 1. Connect the AC POWER ADAPTER to the UHF-5805 receiver’s POWER INPUT connector, then plug the ADAPTER into a compatible AC electrical outlet. 2. Connect the UHF-5805’s receiver to a sound system, mixer or amplifier’s microphone input(s) with either one ¼”...
Removing the Field Replaceable Modules Each of the 4 microphone modules on the UHF-5805 were designed in a way that allows them to slide out. This is a convenient feature if ever a module needs to be repaired or replaced.
Charging the Microphones The UHF-5805 comes with two dual chargers that let you charge all four microphones at the same time. Charging the Microphones If the LED light on the microphone(s) does not light up when the microphone is turned on, this indicates that...
NAS - P rovide both RF and AF signals. 2. POWER (LED) - Indicates whether the UHF-5805 is ON or OFF. When it is lit, the power is ON. 2. POWER (LED) 2. POWER (LED) - Indicates whether the UHF-5805 is ON or OFF. When it is lit, the power is ON.
UHF-5805 & stage monitor/p.a. loudspeakers If you will be using the UHF-5805 with stage monitors and/or P .A. system, try the following: • Place the stage monitor directly behind the microphone. • Locate the P .A. loudspeakers so that they point away from the rear of the microphone. (With the speakers located in these positions, the possibility of feedback is greatly reduced).