Jobsite Connection - Trane Precedent YSC060-120 User Manual

DISCONNECT
SWITCH
(BY OTHERS)
ZONE SENSOR
OR THERMOSTAT
For specific wiring information, see the installation instructions.
All wiring except power wires is low voltage.
All customer supplied wiring to be copper and must conform to NEC or CEC and local electrical codes. Wiring shown dotted is to be furnished and installed by the customer.
44
Jobsite
Connections
ROOFTOP
UNIT
Typical Number Of Wires
Zone Sensors
A — Manual Changeover
Manual/Auto Changeover
Manual/Auto Changeover with
Status Indication LED's
Programmable Night Setback with
Status Indication LED's
Thermostats
A — 4 wires, 24-volts
B — 3 Power Wires + 1 Ground Wire (three phase)
2 Power Wires + 1 Ground Wire (single phase)
4
5
10
7
RT-PRC017-EN