Cut (Remove Part); Silence (Part Erase); Clone Track (Track Duplication); Clean Out (Track Erase) - Tascam Digital Portastudio DP-03 Owner's Manual

8-track
Hide thumbs Also See for Digital Portastudio DP-03:
Table of Contents

Advertisement

8 – Editing Tracks

CUT (remove part)

This function cuts (deletes) the audio data between the
IN and OUT points on the selected track, and shifts the
remaining recording after the OUT point forward to the IN
point. Therefore, the track becomes shorter.
The following parameters are used in this operation.
CUT TRK (
to
,
/
,
/
1
8
1
2
3
4
IN/OUT

SILENCE (part erase)

This function cuts (deletes) the audio data between the
IN and OUT points on the selected track, leaving silence
between the IN and OUT points, as though there had
been no recording.
This operation does not change the length of the track.
The following parameters are used in this operation.
SILENCE TRK (
to
,
/
1
8
1
2
IN/OUT
TIP
Using this function, you can delete short noises, for
example.
52
TASCAM DP-03
,
/
,
/
,
-
,
)
5
6
7
8
1
8
ALL
,
/
,
/
,
/
,
-
)
3
4
5
6
7
8
1
8

CLONE track (track duplication)

Use this function to duplicate a single track, a track pair or
the stereo master track on a different track or track pair.
Each track is copied entirely, so the IN/OUT/TO points
have no effect.
The following parameters are used in this operation.
SOURCE TRK (
to
,
/
1
8
1
2
DESTINATION TRK
NOTE
If you choose the same track for both the SOURCE TRK and
the DESTINATION TRK and press the F2 (
the
message appears and the operation is
Same Track
not executed.

CLEAN out (track erase)

Use this function to completely erase the selected track.
This erases the entire track, so the IN, OUT and TO points
have no effect.
The following parameter is used in this operation.
CLEAN OUT TRK (
to
,
1
8
,
/
,
/
,
/
,
-
,
)
3
4
5
6
7
8
1
8
MST
) button,
EXEC
/
,
/
,
/
,
/
,
-
)
1
2
3
4
5
6
7
8
1
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents