Erasing Songs; Protecting Songs - Tascam Digital Portastudio DP-03 Owner's Manual

NOTE
An SD card formatted by this unit can only have one
partition, so it is not usually possible to copy to a different
partition. However, this unit can use an SD card that has
been created with multiple partitions on another TASCAM
DP series unit, and copying between partitions is possible
in this case.
7 Press the F4 ( ) button to copy the file(s) and
EXEC
return to the screen.
SONG
NOTE
To cancel song copying, press the F1 (
instead of the F4 ( ) button.
EXEC
8. Press the HOME button to return to the Home
Screen.

Erasing songs

You can erase a single song or multiple songs at once. You
might want to erase unneeded songs if the SD card starts
to run out of open space.
1 When the recorder is stopped, press the MENU
button to open the
MENU
2 Use the DATA wheel to select
F4 (¥) button to open the
3 Use the DATA wheel to select
F4 (¥) button to open the
which shows a list of songs.
4 Use the DATA wheel to select a song that you want
to erase and press the F4 ( ✔ ) button.
A check appears in the checkbox next to the song.
NOTE
To remove the check from the checkbox, press the F4 ( ✔ )
while the song is selected.
5 To erase multiple songs, repeat step 4.
6 After selecting all songs that you want to erase,
press the F2 ( ) button. A confirmation screen
EXEC
opens.
) button
BACK
screen.
, and press the
SONG
screen.
SONG
, and press the
ERASE
screen,
SONG ERASE
5 – Song Management
7 Press the F3 ( ) button.
YES
After the songs are erased, the
NOTE
To cancel erasing a song, press the F4 (
of F3 ( ) button.
YES
8 Press the HOME button to return to the Home
Screen.
NOTE
Every MTR partition must always have at least one song,
so if you erase all the songs on a partition, a new song is
created automatically.

Protecting songs

If you protect a song, editing, recording and erasing of
that song is prevented.
1 Load the song that you want to protect.
2 When the recorder is stopped, press the MENU
button to open the
MENU
3 Use the DATA wheel to select
F4 (¥) button to open the
4 Use the DATA wheel to select
the F4 (¥) button to open the
screen, where you can turn protection ON and OFF.
5 Use the DATA wheel to set
press the F2 ( ) button.
EXEC
After is turned
PROTECT
reopens.
6 Press the HOME button to return to the Home
Screen.
NOTE
In the song list used to copy, erase and conduct other
•
functions, a lock icon ( ) appears next to protected
songs.
If you try to execute a prohibited operation (edit,
•
record, erase) on a protected song, a "
" message appears and the operation is
Protected
prevented.
To remove protection from a song, follow the above
•
procedures but set
PROTECT
screen reopens.
SONG
) button instead
NO
screen.
, and press the
SONG
screen.
SONG
, and press
PROTECT
SONG PROTECT
to , and
PROTECT ON
, the screen
ON SONG
Song
to in step 4.
OFF
37
TASCAM DP-03