Trade Practices Act 1974 or by any legislation of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520 939)(the “Company”) to be free from defects in material and workmanship for a period of 24 months from Electric Line Trimmer the date of original purchase.
GENERAL IDENTIFICATION ASSEMBLY INSTRUCTIONS • DEBRIS SHIELD WARNING: The debris shield must be installed (Fig. 1) to properly dispense trim- ming line and protect operator. Shield fits snug on shaft. Some force may be required. Fig. 3A Fig. 3B 1. Seat shield (B) onto shaft bracket (C). 2.
FENCE/FOUNDATION TRIMMING. Approach trim- Install the spring (C) over the spindle (D). Insert each • CLEANING ming around chain link fences, picket fences, rock end of the line through an eyelet (G) in the housing Regular cleaning and maintenance of your line trim- walls and foundations slowly to cut close without whip- (E) (Fig.