Assembling Your Juicer - Sunbeam Juice Stream JE5200 Instruction Booklet

Assembling your juicer

Before Use
After unpacking your juicer, we recommend
that you dissemble the unit before using
for the first time. Wash all parts except the
motor base in hot soapy water. Rinse and dry
immediately.
Important: Always ensure your juicer is
unplugged from the power outlet when not
in use, during assembling or whilst removing
parts.
1. S et the motor base on a dry, level surface.
For convenience when juicing, have the
control switch facing you – figure 1.
Figure 1
2. P lace the juice collector / bowl onto the
top of the motor base – figure 2.
Figure 2
3. P osition the stainless steel blade and
filtering basket onto the motor drive shaft
and push down until firmly in place.
– figure 3.
4. P lace the juicer cover onto the juice
collector / bowl, with the feed chute
positioned over the stainless steel blade
and filtering basket and push into position
– figure 4.
Figure 3
Figure 4
7