Advertisement
Quick Links
User Instructions
Rev. 9/07
Unpacking:
Every Revo I™ has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your fixture for any damage and be
sure all accessories necessary to operate the unit has arrived intact. In
the case damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Do not
return this unit to your dealer without first contacting customer sup-
port.
Introduction:
suit for creating high quality affordable intelligent fixtures. The Revo I™
is a DMX intelligent LED effect. This fixture light weight and compact
which makes it a great piece for mobile DJ's and clubs. This unit can
be used in a master/slave configuration or stand alone sound-active
mode, or can be controlled via DMX controller.
Customer Support:
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
To purchase parts online visit http://parts.americandj.com
Warning!
not expose this unit to rain or moisture.
Caution!
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
PLEASE recycle the shipping carton when ever possible.
American DJ
®
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
Revo I™
Thank you for purchasing the Revo I™ by American DJ
The Revo I™ is part of American DJ's continuing pur-
American DJ
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To prevent or reduce the risk of electrical shock or fire, do
There are no user serviceable parts inside this unit. Do not
.
®
American DJ Supply
- www.americandj.com - Revo I™ User Manual Page 2
©
®
Introduction
provides a toll free customer sup-
®
.
®
Advertisement
Related Manuals for American DJ Revo I
Summary of Contents for American DJ Revo I
- Page 1 Thank you for purchasing the Revo I™ by American DJ ® Every Revo I™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
- Page 2 • Do not attempt to operate this unit, if it becomes damaged. • This unit is intended for indoor use only, use of this product out` The Revo I™ carries a 3 year (1095 days) limited warranty. Please fill doors voids all warranties.
-
Page 3: Power Supply
PIN 3 (DMX +) of the last fixture. Figure 4 5-Pin XLR DMX Connectors. The Revo I™ can be controlled via DMX-512 protocol. The Revo I™ is Some manufactures use 5-pin XLR a four channel DMX unit. The DMX address is set on the bottom of the connectors for DATA transmission in place of 3-pin. -
Page 4: Operating Modes
(LED Off) (LED On) ® 2. The Revo I™ uses four DMX channels to operate see page 8 for the DMX traits. 3. To run your fixture in DMX mode, plug in the fixture via the XLR American DJ Supply - www.americandj.com - Revo I™... -
Page 5: Warranty
3. Always be sure to dry all parts completely before plugging of the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the the unit back in. -
Page 6: Specifications
©American DJ Supply American DJ World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 / Fax: 323-582-2610 Web: www.americandj.com / E-mail: info@americandj.com American DJ Supply - www.americandj.com - Revo I™ User Manual Page 11 © ®...