Dynamic Convergence
1. From the Display Test menu, select the white cross-hatch test pattern.
2. Adjust the Y BOW (RV805), located on the bottom PC board, to eliminate red, green, and blue
bowing at the top and bottom of the center vertical line. See figure 4-19.
3. Adjust the Y BOW CROSS (RV804), located on the bottom of the PC board, to eliminate red, green,
and blue orthogonal misalignment at the top and bottom of the center vertical line. See figure 4-20.
Figure 4-19. Y BOW Adjustment
Figure 4-20. Y BOW CROSS Adjustment
HP 16500A/16501A - Adjustments
4-17