Baud Rate Selection; System Configuration Menu; Rs-232C Configuration Menu - HP 16500A Service Manual

HP 16500A/16501A - Installation

2-13. Baud Rate Selection

The baud rate of the HP 16500A is set at power-on for 9600 baud. To change the baud rate, proceed as
follows:
1. With the operating system disk in one of the disk drives, turn on the instrument to obtain the System
Configuration menu. See figure 2-8.
2. Touch the RS-232C field in the lower right corner of the screen to obtain the RS-232C configuration
menu. See figure 2-9.
2-10
Figure 2-8. System Configuration Menu
Figure 2-9. RS-232C Configuration Menu