The Dishwasher Does Not Fill/Drain - Miele G 1272 Operating Instructions Manual

The dishwasher does not fill/drain.

Problem
The In-operation
indicator is flashing
quickly.
The buzzer is
sounding.
The Inlet/Drain
indicator flashes
when the door is
open.
The dishwasher
stops during a
programme.
The In-operation
indicator is flashing
quickly.
The buzzer sounds.
The Inlet/Drain
indicator flashes
when the door is
open.
Fault code FXX
shows in the Time
left display.
Possible cause
The stopcock is
closed.
Faults F12/F13:
Water inlet
restricted.
Fault F11:
Water outlet is
restricted, water
remains in the
wash cabinet at
the end of a
programme.
Problem solving guide
Remedy
– Open the stopcock fully.
Before rectifying the problem you
must:
– Switch the dishwasher off with the
Off button V.
– Open the stopcock fully.
– Clean the water inlet filter. See
"Maintenance".
– The water pressure at the intake is
lower than 30 kPa (0.3 bar).
Seek professional advice.
– Clean the filter combination. See
"Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve. See
"Maintenance".
– Remove any kink in the drain hose.
51