Powering The Camera On/Off - Vivitar ViviCam S124 User Manual

Powering the Camera On/Off

 Make sure the batteries have been inserted properly into your digital camera. If your camera
comes with a rechargeable lithium battery, make sure it is fully charged before the first use.
 Make sure an SD card has been inserted into your camera.
(SD card up to 32GB - SD Card not included)
Please see Initial Camera Setup
POWERING THE CAMERA ON
Press the Power button to turn your camera ON.
 After powering on, the camera emits a sound and the LED light turns on briefly.
 The LCD screen turns on with your camera in Photo Capture Mode to start.
POWERING THE CAMERA OFF
While the camera is on, you can press the
camera OFF. A "Goodbye" screen appears and the camera then powers off completely.
AUTO POWER OFF – POWER SAVING
Your digital camera also has an Auto Power Off feature that will automatically turn off your
camera after a specific period of time that your camera is left idle. The Auto Power Off settings
can be set from the Auto Power Off settings menu (in either Photo Capture Mode or Video
Capture Mode).
for more information.
Power button again at any point to turn your
11