Table of Contents
Advertisement
ENERGY SAVE MODE
To conserve battery power, if the camera is not in use for 60 seconds, it will
automatically power off.
Taking Photos
1. Compose your shot using the LCD display.
2. Press the UP /Zoom In or DOWN/Zoom Out buttons to better set the camera
display if desired.
3. Hold the camera steady and press the Shutter button to take the photo.
4. The photo is saved as a JPEG file in the camera's memory.
5. The LCD screen will display the number of photos that can be still taken.
Note: The LCD displays the number of photos that may still be taken at the current
resolution. Once the camera memory is full you will not be able to continue to capture
photos.
If you attempt to take a photo when the memory is full note that the number of photos
will no longer reduce in number. Also, the camera will beep twice continuously and
'000' will appear on the LCD screen.
7
Advertisement
Table of Contents
