Related Manuals for Flymo Venturer 370 RE420
Summary of Contents for Flymo Venturer 370 RE420
- Page 1 For all customer enquiries or for replacement parts, contact:- ☎ ☎ 01325 300303 www.flymo.com eop.customer.services@electrolux.co.uk...
- Page 2 9. Switch off, remove plug from mains and examine electric supply cable for damage or ageing before winding cable for storage. Do not repair a damaged cable, replace it with a new one. Use only Flymo replacement cable. 10. Always wind cable carefully, avoiding kinking.
-
Page 3: Assembly Instructions
3. Only use extension cables specifically designed for outdoor use. CONNECTORS IMPORTANT • Flymo connectors are suitable for use with 2 core cable only. Under no circumstances should these connectors be used for earthed products. • All Flymo connectors and cables are of splashproof construction. -
Page 4: Upper Handle Assembly
Venturer 370 Venturer 370 location point RE420 RE420c Upper Handle Assembly Fitting Upper Handles to Lower Handles (D & E) 1. Ensure the upper handle is located correctly with the lock-off button on the switchbox uppermost 2. Ensure the upper handle and the lower handle are aligned correctly. -
Page 5: Cutting Height Adjustment
Wheel removal Wheel removal Levers fitted Lowest Cut Height Levers fitted Lowest Cut Height Levers Fitted Central Cutting Height Adjustment Wheel removal Cutting Height with removal of wheels (L1, L2, L3) If your lawnmower has wheel hubs as illustrated in Fig L1, the height of cut is adjusted by following steps L1 - L3. -
Page 6: Cutting System Maintenance
1. Start mowing the edge of the lawn nearest to the power point so that the cable is laid out on the lawn you have already cut (T). 2. Mow twice a week in the growing season, your lawn will suffer if more that one third of its length is cut at one time and this may also result in poor collection. -
Page 7: Fault Finding Hints
Fails to Operate 1. Is the correct Starting procedure being followed? See ‘To Start your Lawnmower’. 2. Is the Power Turned On? 3. Check the fuse in the plug, if blown replace. 4. Fuse continues to blow? Immediately disconnect from the mains electric- ity supply and consult your local approved Electrolux Outdoor Products Service Centre. -
Page 8: Service Recommendations
A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your Flymo product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.