Table of Contents
Advertisement
6. Make sure the computer is powered on, then plug the other end of the yellow
Ethernet cable into an Ethernet port on the computer.
7. Make sure at least one of the Ethernet
glows steadily green. This may take a few moments.
8. The phone company previously installed a high-speed Ethernet wall jack
somewhere in the house. Locate it and plug one end of the white Ethernet
cable in the wall jack.
9. Plug the other end of the white Ethernet cable in the white port on the back
of the Router.
10. Make sure the Ethernet
steadily green.
☞
Note: If the Ethernet
the Ethernet cable is connected properly at both ends.
Configuring the Router
1. Open a web browser on the computer connected to the Router. In the
"Address" text box, type:
then press Enter on the keyboard.
2. The "Login" screen appears. Enter the default user name (admin) and pass-
word (password) in the appropriate text boxes, then click OK.
Actiontec Broadband Router User Manual
light on the front of the Router glows
WAN
light does not illuminate, make sure
WAN
http://192.168.1.1
lights on the front of the Router
LAN
8
Advertisement
Table of Contents
