Fisher-Price H4792 Instructions Manual

Fisher-price swing instructions

Advertisement

Quick Links

Product features and decorations may vary from picture above.
Instructions
Model Number: H4792
WARNING
IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
Please read these instructions before use of this product.
Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
Requires four LR20 ("D") alkaline batteries (not included) for operation.
www.fisher-price.com
1

Advertisement

Table of Contents
loading

Summary of Contents for Fisher-Price H4792

  • Page 1 Product features and decorations may vary from picture above. Instructions Model Number: H4792 WARNING IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. Please read these instructions before use of this product. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
  • Page 2 WARNING To prevent serious injury or death from falls and being strangled in the restraint system: • Always use the restraint system. Never rely on the tray to restrain child. • Never use with an active child who may be able to climb out of the seat. •...
  • Page 3 IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. CAUTION This package contains small parts in its unassembled state.
  • Page 4 CORRECT HUBS FACING IN FRONT BASE CURVES INWARD • Check to be sure you have assembled the leg assemblies to the bases correctly. Please refer to the illustrations above. • If the leg assemblies are assembled incorrectly to the bases, simply pull the legs from the bases. Please re-read and repeat assembly step 2.
  • Page 5: Side View

    Armrest Holes Round End Seat Tube Seat Bottom • Position the seat bottom so that the back faces you and the armrest holes are facing up. • Locate the round end seat tube. Hint: Look at opening in the straight end of the tube. It should be completely round.
  • Page 6 • Fit the seat back to the seat bottom. • Insert the rod into the side opening between the seat back and seat bottom. • Insert a #8 x 1.9 cm screw into the opening in the rod and tighten. Assembly Seat Back Seat Bottom...
  • Page 7 Assembly Tool Rounded Side • Attach a lock nut, rounded side facing out, onto one end of a seat back wire. • Tighten the lock nut by using the assembly tool. Turn the tool clockwise to tighten the lock nut. •...
  • Page 8 Elastic Loops Holes • Place the pad onto the seat. • Insert the pad elastic loops through the holes in the seat bottom. • From under the seat, fit the elastic loops onto the tabs on the seat back. Assembly •...
  • Page 9 Slot Clips Elastic Loops • Fit the crotch belt through the slot in the pad. • Fit the pad side clips around the edge of the seat bottom. • Fit the pad elastic loops around the front edge of the seat bottom.
  • Page 10 Assembly Tray Tray Links • Fit and “snap” the tray onto the seat armrests. • Insert and “snap” the tray links into the holes in the tray. • Fit the toy links and/or toys on the toy bar/tray! Assembly is now complete.
  • Page 11: Battery Installation

    Hint: We recommend using alkaline batteries for longer battery life. • Loosen the screws in the battery compartment door and remove the battery compartment door. • Insert four “D” (LR20) alkaline batteries into the battery compartment. • Replace the battery compartment door and tighten the screws. Battery Installation 1,5V x 4 “D”...
  • Page 12: Setup And Use

    IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. WARNING To prevent serious injury or death from falls and being strangled in the restraint system:...
  • Page 13 Swinging • Make sure your child is properly secured in the seat. • Slide the swing power switch on to any of six speed settings. • Watch the toys move when the seat swings! • Be sure to slide the switch to the off position when the swing is not in use.
  • Page 14 Setup and Use Toy Bar Using the Toy Bar • Lift or lower the toy bar for baby’s enjoyment. Hint: The toys move when the swing is turned on! Care • The pad is machine washable. Wash it separately in cold water on the gentle cycle.
  • Page 15: Consumer Information

    Storage Toy Bar PRESS BUTTON • Push the toy bar backward to its storage position. • Press the button on each housing and push the rear legs toward the front legs. Stand the frame against a wall for storage. Consumer Information GREAT BRITAIN Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
  • Page 16 Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA H4792pr-0726...

Table of Contents