Problems And Solutions; Consumer Information - Fisher-Price BUBBLE MOWER H8910 Instructions Manual

Problem
No bubbles
Bubble solution is leaking from
the mower
Bubble solution is foaming
Visit us on-line at www.service.fisher-price.com.
Call Fisher-Price Consumer Relations, toll-free at 1-800-432-5437, 8 AM- 6 PM EST
®
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Write to us at: Fisher-Price
East Aurora, New York 14052.
For countries outside the United States:
CANADA - Questions? 1-800-432-5437, Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN - Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk.
AUSTRALIA - Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND - 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA - Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,
Tsimshatsui, HK, China.

Problems and Solutions

Not enough bubble solution in
bubble chamber
Bubble chamber is clogged
and dirty
You have not walked far enough
to produce bubbles
You are walking too quickly
The rear wheels do not contact
the ground
Silicone or oily lubricants
may have gotten in the
bubble chamber
Bubble chamber over-filled
The mower is used on an
inclined surface
Bubble chamber is clogged

Consumer Information

Consumer Relations, 636 Girard Avenue,
®
Cause
6
Solution
Press down on bubble solution
bottle for 15 seconds to refill.
Follow instructions in "Let's
Clean Up" section to clean bubble
chamber thoroughly.
The bubble mower needs to be
pushed a minimum of 15-20
walking steps before bubbles
begin to flow.
Walk at a slow, steady pace.
Push the mower so that the
rear wheels always contact
the ground.
Never use silicone or oily
lubricants on this product (the
wheels). Bubbles will not form
if even a very small amount of
these substances get into the
bubble chamber.
Fill only by using filler cap. The
filler cap dispenses the correct
amount of solution.
Use the mower only on flat,
level ground.
Follow instructions in "Let's
Clean Up" section to clean bubble
chamber thoroughly.