Advertisement
Quick Links
Product features and decorations may vary from photo above.
Instructions
Model Number: H4790
WARNING
IMPORTANT! KEEP FOR FUTURE REFERENCE.
Please read these instructions before assembly and use of this product.
Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
www.fisher-price.com
1
Advertisement
Related Manuals for Fisher-Price H4790
Summary of Contents for Fisher-Price H4790
- Page 1 Product features and decorations may vary from photo above. Instructions Model Number: H4790 WARNING IMPORTANT! KEEP FOR FUTURE REFERENCE. Please read these instructions before assembly and use of this product. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
- Page 2 • Always keep child in view while in the high chair. • Never leave child unattended. • It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted. This product contains small parts in its unassembled state.
- Page 3 Parts 2 Toys (Toys may be different) 3 Food Trays Headrest Seat Back Hinge Rod Base Tray #10 x 2.2 cm Black Screw Frame Frame 2 Seat Bottom Tubes Seat Bottom #8 x 1.9 cm Screws 4 Screw Retainers #8 x 1.9 cm Screws #10 x 2.2 cm Black Screw Back Base...
- Page 4 IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replace- ment parts and instructions if needed. Never substitute parts. •...
- Page 5 Footrest Insert Screws Here #10 x 2.2 cm Black Screw - 2 • Insert two #10 x 2.2 cm black screws through the footrest and into the seat bottom. Tighten the screws. Seat Back Pin Opening Seat Bottom Assembly • Turn the seat bottom assembly upright. •...
- Page 6 Back Base Tapered Leg Tube Front Base • Identify the back and front base. The front base has tapered leg tubes. You will use the back base for the next assembly step. Frame Decorated Side #10 x 2.2 cm Black Screw - 2 Back Base Hole Screw Retainers Back Base Hole...
- Page 7 #10 x 2.2 cm Black Screw - 2 Screw Retainer - 2 Front Leg Holes Screw Retainers • Insert the frame front legs onto the front base. • Fit a screw retainer over a hole in the front leg. • Insert a #10 x "...
- Page 8 Seat Height Adjusters Seat Bottom Tube Ends Back and Bottom View • From the back and bottom of the assembly, insert a #8 x 1.9 cm screw through both seat height adjusters and the ends of the seat bottom tube. Tighten the screws. Assembly #8 x 1.9 cm Screw - 2 Hole...
- Page 9 Shoulder Portion • Insert the crotch belt through the slot in the pad. Make sure the crotch belt is not twisted. • Fold the top of the pad down. • Remove the shoulder portion of the waist/shoulder belts by feeding them through the slots in the seat back. Bottom Slots •...
- Page 10 Handle Pad Strap Small Fastener Large Fastener Back View • Fit the strap on the top of the headrest through the handle. • Fit the pad strap through the handle and press it to the small fastener on the back of the seat. •...
-
Page 11: Securing Your Child
Contact Mattel for replace- ment parts and instructions if needed. Never substitute parts. Place the high chair on a level, stable surface away from electri- cal flexes. Be sure to keep electrical flexes out of child’s reach. - Page 12 To change shoulder belt slots: • From the back of the high chair, push the shoulder portion of the waist/shoulder belts through the seat back slots. Securing Your Child...
- Page 13 WARNING Prevent serious injury or death from falls or sliding out. The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • Fit the base tray onto the seat armrests. Push down until the base tray "snaps"...
- Page 14 Hint: The base tray can be removed two ways (see steps 10 and 11)! • Squeeze one or both of the latches underneath the base tray and lift. • While pushing the release bar on the front of the base tray, pull the tray base towards you and remove.
-
Page 15: Adjusting The Seat
WARNING Prevent serious injury or death from falls or sliding out. It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted. Seat Height Adjuster Press Lever Hint: Adjust the seat height to any of seven positions! To adjust the seat height: •... -
Page 16: Consumer Information
• Pull the frame release latches forward and push the rear legs toward the front legs. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.