Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung 451 User Manual

Series 450/451
Hide thumbs Also See for 451:
Table of Contents

Advertisement

Operation

Turning the TV On and Off

Press the POWER
button on the remote control.
You can also use the POWER
button on the TV.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1
minute while "Plug & Play" is running.
The Screen Saver is activated if there is no operating signal for longer than 15
minutes.
1. Press the POWER button on the remote control.
The message "Menu Language, Store Demo, Channels and Time will be set." is
displayed.
Press the ENTER
button,
then "Select the language of the OSD"
is automatically displayed.
2. Press the
or
button to select language, then press the ENTER
The message "Select 'Home Use' when installing this TV in your home." is
displayed.
3. Press the
or
button to select "Store Demo" or "Home Use", then
press the ENTER
button.
The message "Select the antennas to memorize." is displayed.
We recommend setting the TV to "Home Use" mode for the best picture in your
home environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to "Store Demo" mode and you want to return to
"Home Use" (Standard): Press the Volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. Press the
or
button to memorize the channels of the selected connection.
Press the ENTER
button to select "Start".
Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air" and "Cable" antenna signals.
In Cable mode, you can select the correct signal source among STD, HRC, and
IRC by pressing the
,
,
If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable
system that exists in your particular area.
5. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the ENTER
selected.
After all the available channels are stored, it starts to remove scrambled
channels (see page 28). The Auto program menu then reappears.
Press the ENTER
button when channel memorization is complete. The
message "Set the Clock Mode." is displayed.
menu
or
button, then press the ENTER
button with "Stop"
English - 13
Plug & Play
Menu Language, Store Demo,
Channels and Time will be set.
Start
Plug & Play
Select the language of the OSD.
Language
:
English
Español
Français
button.
Move
Plug & Play
Select 'Home Use' when installing this TV in your
home.
Store Demo
Move
Enter
Plug & Play
Select the antennas to memorize.
Air
Cable
Auto
Move
Enter
Plug & Play
Selects a cable signal type for your location.
Analog
STD
HRC
IRC
Digital
STD
button.
HRC
IRC
Move
Enter
Auto Program
Plug & Play
Auto Program in Progress.
DTV Air : 02
Air : 11
DTV Cable : 23
Cable : 21
Stop
Enter
Plug & Play
Auto Program
Removing scrambled channel.
Stop
Enter
Enter
Enter
Home Use
Start
Start
Start
Skip
Start
Skip
Cable 50
50 %
Skip
DTV Cable 41
77 %
Skip

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

450Ln19a450c1dLn19a451c1dLn22a450c1dLn22a451c1d

Table of Contents