Advanced Operations - Kenwood NEXEDGE NX-720 Instruction Manual

Vhf & uhf digital transceiver
Hide thumbs Also See for NEXEDGE NX-720:
Table of Contents

Advertisement

EMERGENCY CALLS
If your transceiver has been programmed with the Emergency function, you can make
emergency calls.
1 Press and hold the key programmed as [Emergency].
Ask your dealer for the length of time necessary to hold this key before the
transceiver enters Emergency mode.
When the transceiver enters Emergency mode, it will change to the Emergency
channel and begin transmitting based on how it is set up by your dealer.
2 To exit Emergency mode, press the [Emergency] key again.
If the Emergency mode completes a preset number of cycles, Emergency mode will
automatically end and the transceiver will return to the zone and channel that was in
use before Emergency mode was entered.
Note:
◆ Your dealer can set the transceiver to emit a tone when transmitting in Emergency mode.
◆ Your dealer can set the transceiver to emit tones and received signals as normal, or mute the
speaker during Emergency operation.
SCRAMBLER (ANALOG) / ENCRYPTION (DIGITAL)
■ Secure (Encrypted) Transmission
Press the key programmed as [Scrambler/ Encryption] to switch the transceiver to
secure (encrypted) transmission.
The
icon appears on the display.
Pressing the PTT switch after the Scrambler or Encryption function has been turned
ON encrypts the transmitted signal.
■ Selecting the Scrambler Code or Encryption Key
1 Press the key programmed as [Scrambler/ Encryption Code] to enter Code or
Key Selection mode.
2 Press the
There are 16 available Scrambler codes or Encryption keys (1 ~ 16).
Note: This function cannot be used in certain countries. Contact your KENWOOD dealer for
further information.
SIGNALING
■ Quiet Talk (QT)/ Digital Quiet Talk (DQT)
Your dealer may have programmed QT or DQT signaling on your transceiver channels.
A QT tone/ DQT code is a sub-audible tone/code which allows you to ignore (not hear)
calls from other parties who are using the same channel.
Operator Selectable Tone (OST)
If a key has been programmed with [OST], you can reprogram the QT/DQT settings on
each of your channels.
16

ADVANCED OPERATIONS

/
key to increase or decrease the code or key.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexedge nx-720gNexedge nx-820Nexedge nx-820g

Table of Contents