Advertisement
Quick Links
Making Connections
BASIC
Connecting to Your TV Using an
RF Modulator (not supplied)
Placing the Speakers
• Place the center speaker directly above or below the TV so that the
sound of the center channel is localized at the TV.
• Try to place all the speakers at an equal distance from the listening
position.
R
C
EMOTE
ONTROL
Installing
Batteries
The remote requires two
AA batteries (not supplied).
31-5029
5 DVD Home Theater in a Box
with Wireless Rear Speakers
Connecting the Video
Output to Your TV
OR
Use the supplied video
cable to connect the
VIDEO OUT
video input on your TV.
Listening to TV Audio
Through the System
Connect a stereo
audio cable (not
supplied) from the
audio outputs of your
TV to the
jacks
TV IN
on this system.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
Refer to your Owner's Manual for complete instructions.
GOOD
S-video Output to Your TV
OR
Use an S-video cable (not
supplied) to connect the
jack to a
S-VIDEO OUT
video input on your TV.
Connecting the Speakers
• Make sure you disconnect power from all components.
• The wireless mode is the default setting.
• Connect each speaker using the color-coded speaker cable. Match them to the
colored labels above the speaker terminals.
• Do not connect any of the supplied speakers to any other amplifier. This may
result in malfunction or fire.
© 2003 RadioShack Corporation.
All Rights Reserved.
BETTER
Connecting the
OR
Use a component video cable
(not supplied) to connect the
COMPONENT VIDEO OUT
to an S-
to a set of component inputs
on your TV.
1. Connect the
jack on the transmitter to the
WIRELESS
the rear panel of the receiver,
using the supplied RCA stereo
cord.
2. Connect the supplied AC
adapter to the
the rear panel of the unit.
Then plug the other end into
an AC power outlet.
RadioShack Corporation
Fort Worth, Texas 76102
BEST
Connecting the
Component Video
Output to Your TV
(
)
WIRELESS
IN
(
) jack on
OUT
inlet on
DC IN
ARH7078-A
04A03
Printed in Malaysia
Advertisement
