Generac Power Systems EZ Switch RTS10EZA1 Specification

EZ Switch™
DESCRIPTION
The Generac EZ Switch™ is designed to operate with 8-17kW air-cooled generators. This 100 amp Transfer switch has an
integrated load center for picking up the emergency circuits. It is especially useful where the main service is large and only a
portion of the building load will be served by the generator. It is available with a built in 10, 12, 14 or 16-circuit load center to
supply only those circuits that are essential during an emergency. All standard and load center transfer switches are UL and CUL
Listed and suitable for use as optional standby systems (NEC702).
FEATURES
STANDARD
All EZ Switches are housed in a steel NEMA 1 enclosure, with electrostatically applied and baked powder paint. The Heavy Duty
Generac Contactor is a UL recognized device, designed for years of service. The control at the generator handles all the timing,
sensing and exercising functions.
CONTACTOR RATING
The transfer switch contactor is rated at 250 VAC and is available in a single phase configuration only.
EZ Switch™ Series
Pre-Wired Automatic Transfer Switch
with Built-In Load Center
100 Amp, 250 VAC, NEMA 1
Model RTS10EZA1 – 10 Circuit Switch
Model RTS12EZA1 – 12 Circuit Switch
Model RTS14EZA1 – 14 Circuit Switch
Model RTS16EZA1 – 16 Circuit Switch
®
1 of 2