Philco CDV210HH8 Owner's Manual

Dvd/cd player with video cassette recorder
Table of Contents

Advertisement

Owner's Manual
Please read before using this unit.
DVD/CD Player with Video Cassette Recorder
CDV210HH8
If you need additional operating assistance after
reading this owner's manual, please call
TOLL FREE : 1-800-414-1053
or visit our web site at
http://www.funai-corp.com

Table of Contents

Laser Safety ................................................................................................................. 2
■ Important Safeguards .........................................................................3
Location and Handling ........................................................................................... 4
Avoid the Hazards of Electrical Shock and Fire ............................................. 4
Moisture Condensation Warning ....................................................................... 4
About Copyright ....................................................................................................... 4
Symbols Used in This Manual .............................................................................. 4
Maintenance .............................................................................................................. 4
■ About the Video Cassettes and Discs ..................................................5
Playable Video Cassettes ....................................................................................... 5
Playable Discs ............................................................................................................ 5
Unplayable Discs ...................................................................................................... 5
Setup
■ Connections .........................................................................................6
RF Output Channel .................................................................................................. 6
Hint for Cable Box or Satellite Box ..................................................................... 6
Connection to an Audio System ......................................................................... 6
Connection to a TV .................................................................................................. 7
■ Preparation for Use .............................................................................8
Turn on the Unit for the First Time .................................................................... 8
To Add or Delete Channels ................................................................................... 8
Clock Setup ................................................................................................................. 8
■ Function Overview ..............................................................................9
Front Panel Indicator .............................................................................................. 9
VCR / DVD Switching .............................................................................................. 9
Front & Rear Terminals ........................................................................................... 9
Remote Control ........................................................................................................10
Installing the Batteries for the Remote Control ...........................................10
■ Playback .............................................................................................11
■ Other Operations ...............................................................................11
Index Search ..............................................................................................................11
Time Search ...............................................................................................................11
Auto Repeat ...............................................................................................................12
Basic TV Connection
Cable TV
Antenna
signal
or
Disconnect
5
Please refer to "Connections" on page 6.
© 2007 Funai Electric Co., Ltd.
E8C1UCD_EN.indd 1
E8C1UCD_EN.indd 1
Supplied Accessories
Remote control
(NB183UD)
with two AA batteries
Audio/Video cables
(WPZ0102TM018 /
WPZ0102LTE01)
■ Recording............................................................................................12
Recording & OTR (One Touch Recording) ......................................................12
Timer Recording ......................................................................................................12
Hints for OTR and Timer Recording ..................................................................13
Copying a Video Tape ...........................................................................................14
■ Playback .............................................................................................15
■ MP3 Playback .....................................................................................16
■ Search Functions ................................................................................16
Using Track Search ..................................................................................................16
Using Title / Chapter Search ................................................................................16
Using Time Search ..................................................................................................16
■ On-Screen Display ..............................................................................17
■ Repeat / Random / Programmed Playback .......................................18
Repeat Playback / Repeat A-B Playback .........................................................18
Random Playback / Programmed Playback ..................................................18
■ Special Settings ..................................................................................19
Subtitle Language / Audio Language..............................................................19
Camera Angles / Black Level Setting ...............................................................19
Stereo Sound Mode / Virtual Surround...........................................................19
■ DVD Setup...........................................................................................20
LANGUAGE Setting .................................................................................................20
DISPLAY Setting .......................................................................................................21
AUDIO Setting ..........................................................................................................21
PARENTAL Setting ...................................................................................................22
OTHERS Setting ........................................................................................................22
Information
■ Troubleshooting Guide ......................................................................23
■ Specifications .....................................................................................24
■ Limited Warranty ...............................................................................24
■ Quick Use Guide .................................................................................25
Antenna
Cable TV
signal
or
2
ANT-IN
3
Connect
ANT-OUT
Connect
RF cable
(supplied)
RF cable
(WPZ0901TM002)
Owner's Manual (1VMN23713)
Owner's Manual
4
(Back of TV)
AC
Plug in
outlets
From DVD/VCR
From TV
2007/04/03 9:48:48
2007/04/03 9:48:48

Advertisement

Table of Contents
loading

Summary of Contents for Philco CDV210HH8

  • Page 1: Table Of Contents

    Cable TV Antenna Cable TV signal signal (Back of TV) Disconnect Please refer to “Connections” on page 6. © 2007 Funai Electric Co., Ltd. E8C1UCD_EN.indd 1 E8C1UCD_EN.indd 1 Supplied Accessories Remote control (NB183UD) with two AA batteries Audio/Video cables (WPZ0102TM018 / WPZ0102LTE01) ■...
  • Page 2: Precautions

    WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
  • Page 3: Important Safeguards

    IMPORTANT SAFEGUARDS Read Instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions- The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
  • Page 4: Location And Handling

    Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes. with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the...
  • Page 5: About The Video Cassettes And Discs

    About the Video Cassettes and Discs Playable Video Cassettes Use only cassettes marked with this unit. Playable Discs Playable Mark (logo) discs DVD-Video *1, 2, 4, 6 DVD-RW DVD-R *1, 3, 4, 5, 6, 7, 8, 9 DVD+RW DVD+R *1, 4, 5, 6, 8, 9 Audio CD *4, 6 CD-RW...
  • Page 6: Connections

    Connections Please refer to “Basic TV Connection” on the front page before you use this unit. RF Output Channel If channel 3 has been already occupied for broadcasting, 1) Set your TV to channel 4. 2) Insert a pre-recorded tape into this unit. 3) Press [SOURCE] on the unit so that the VCR SOURCE light is lit.
  • Page 7: Connection To A Tv

    Connection to a TV Basic Audio AUDIO IN Audio cable (supplied) DVD/VCR DVD/VCR AUDIO OUT DVD/VCR DIGITAL AUDIO S-VIDEO COMPONENT AUDIO OUT AUDIO OUT VIDEO OUT ANT-IN AUDIO IN COAXIAL VIDEO OUT VIDEO IN ANT-OUT COMPON DIGITAL AUDIO S-VIDEO VIDEO O AUDIO OUT AUDIO OUT (Analog)
  • Page 8: Preparation For Use

    Preparation for Use Turn on the Unit for the First Time Operations described in this manual are mainly based on the remote control. Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel”...
  • Page 9: Function Overview

    Function Overview Front Panel Indicator Lights up during a recording. Blinks when a recording is paused. VIDEO AUDIO STANDBY-ON F.FWD STOP/EJECT PLAY Lights up when power is on. Lights up when the Timer Recording or an OTR recording has been set. VCR / DVD Switching You must first select which component you wish to operate with [SOURCE], as this product is a combination of a VCR and a DVD...
  • Page 10: Remote Control

    Remote Control OPEN/CLOSE STANDBY-ON /EJECT SPEED AUDIO SKIP/CH. VCR/TV SLOW DISPLAY PAUSE PLAY STOP RECORD MENU ENTER SETUP TOP MENU RETURN SEARCH CLEAR/ MODE ZOOM MODE C. RESET SUBTITLE ANGLE REPEAT T-SET Installing the Batteries for the Remote Control Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control.
  • Page 11: Vcr Functions

    Playback Before: Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6. Insert a video cassette To start playback into this unit. PLAY To stop playback To eject the cassette...
  • Page 12: Auto Repeat

    Auto Repeat This function will playback a tape repeatedly from the beginning when the tape reaches the end. Press [MENU], and choose “AUTO REPEAT” during playback. MENU Hint • To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit. •...
  • Page 13: Hints For Otr And Timer Recording

    Select “AM” or “PM”. Then press [B] to go to next step. ONE TIME PROGRAM PROGRAM NUMBER 1 DATE START CHANNEL Repeat the procedure in steps 5 and 6 to set the end time. Select the desired channel. Then press [B] to go to next step. ONE TIME PROGRAM PROGRAM NUMBER 1 DATE...
  • Page 14: Copying A Video Tape

    Copying a Video Tape Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. (Back of another source) DVD/VCR COMPONENT AUDIO OUT AUDIO OUT VIDEO OUT AUDIO IN VIDEO OUT VIDEO OUT VIDEO IN 1) Insert a pre-recorded tape into another VCR for playing. 2) Insert a tape with its record tab into this unit for recording.
  • Page 15: Dvd Functions

    Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit. Playback Before: Turn on the TV, amplifier and any other equipment which are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel.
  • Page 16: Mp3 Playback

    MP3 Playback MP3 is a method of compressing files. You can copy MP3 files on CD-R/RWs from the compu- ter and play the files on this unit. Insert an MP3-format disc, then the file list will automatically appear on the TV screen. Select the desired folder from the list on the left side in the file list.
  • Page 17: On-Screen Display

    On-Screen Display You can check the information about the current disc by pressing [DISPLAY] on the remote control. T(Title): current title number / total titles elapsed time of the current title 03/24 001/002 00:00:40 current repeat setting C(Chapter): DISPLAY current chapter number / total chapters CH(Chapter): current chapter number /...
  • Page 18: Repeat / Random / Programmed Playback

    Repeat / Random / Programmed Playback Repeat Playback Repeat function is available only during playback. PLAY CHAPTER REPEAT <Example : DVD> Each time you press [REPEAT], repeat function changes as example below. (repeat off) CHAPTER (current chapter repeat) TITLE (current title repeat) (repeat off) TRACK (current track repeat)
  • Page 19: Special Settings

    Special Settings Subtitle Language This unit allows you to select a subti- tle language (if available) during DVD playback. PLAY 1. ENG/6 SUBTITLE T-SET Each time you press [SUBTITLE/T-SET], subtitle language changes as example below. (no subtitles) (English subtitles) (French subtitles) To set subtitle ON/OFF PLAY 1.
  • Page 20: Dvd Setup

    DVD Setup You can change the settings of the unit. Press [SETUP]. SETUP <SETUP MENU> LANGUAGE AUDIO SUBTITLE DISC MENU PLAYER MENU LANGUAGE menu DISPLAY menu LANGUAGE_AUDIO DISPLAY_TV ASPECT AUDIO ORIGINAL TV ASPECT 4:3 LETTER BOX SUBTITLE ENGLISH STILL MODE 4:3 PAN &...
  • Page 21: Display Setting

    DISPLAY Setting You can change the display functions. Follow steps 1 to 2 on page 20. Select the desired item. TV ASPECT: (Default: 4:3 LETTER BOX) See Hint on the left. ENTER DISPLAY_TV ASPECT TV ASPECT STILL MODE DISPLAY menu DISPLAY_TV ASPECT TV ASPECT 4:3 LETTER BOX...
  • Page 22: Parental Setting

    PARENTAL Setting Parental Control limits the viewing of discs that exceed your settings. (An incorrect password will not be acceptable.) This feature prevents your children from viewing inappropriate materials. Parental Levels Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set. Follow steps 1 to 2 on page 20.
  • Page 23: Reset To The Default Setting (Except For Parental Setting)

    Reset to the Default Setting (Except for PARENTAL Setting) Press [SETUP]. SETUP STOP <SETUP MENU> LANGUAGE AUDIO SUBTITLE DISC MENU PLAYER MENU Troubleshooting Guide If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist. PROBLEM No power.
  • Page 24: Specifications

    120 V AC +/- 10%, 60 Hz +/- 0.5% Power consumption : 21 W (standby: 3.8W) LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the CANADA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP.
  • Page 25: Quick Use Guide

    Quick Use Guide Connections Please refer to “Basic TV Connection” on the front page before you use this unit. RF Output Channel If channel 3 has been already occupied for broadcasting, 1) Set your TV to channel 4. 2) Insert a pre-recorded tape into this unit. 3) Press [SOURCE] on the unit so that the VCR SOURCE light is lit.
  • Page 26: Vcr Playback

    Quick Use Guide VCR Playback Before: Turn on the TV and set it to channel 3. • If channel 3 has been already oc- cupied for broadcasting, see “RF Output Channel” section. Insert a video To start cassette into this unit. playback PLAY To stop...

Table of Contents