Table of Contents
Advertisement
Quick Links
Grow With Me
Grow With Me
Grow With Me
™
RC Rally
RC Rally
RC Rally
Model Number 77306
Please keep this instruction sheet for future reference,
as it contains important information.
Requires four "C" (LR14) alkaline batteries for control tower; four "AA"
(LR6) alkaline batteries for car; and one 9V (6LR61) alkaline battery
for remote controller (batteries not included).
Adult assembly is required.
Tool required for assembly:
Phillips screwdriver (not included).
Advertisement
Table of Contents
Related Manuals for Fisher-Price GROW WITH ME 77306
Summary of Contents for Fisher-Price GROW WITH ME 77306
- Page 1 Grow With Me Grow With Me Grow With Me ™ RC Rally RC Rally RC Rally Model Number 77306 Please keep this instruction sheet for future reference, as it contains important information. Requires four "C" (LR14) alkaline batteries for control tower; four "AA" (LR6) alkaline batteries for car;...
- Page 2 Parts Double Flag 2 Flags Handle Ring of Fire Remote Controller Control Holder Tower Ramp Handle Support 4 Stadium Crash Gate Lights Remote Controller 2 Ramp Rails Starting Ramp Dirt Track 3 Cones 5 Barrels 3 Hay Flexible Bales Track #6 x "...
-
Page 3: Battery Installation
Battery Installation Control Tower 1.5V x 4 “C” (LR14) Shown Actual Size • Locate the battery compartment on the back of the control tower. • Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. -
Page 4: Remote Controller
Battery Installation Remote Controller Compartment 9V (6LR61) Shown Actual Size • Locate the battery compartment on the back of the remote controller. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. •... -
Page 5: When To Replace Batteries
When To Replace Batteries If this toy is working slowly or erratically, it’s likely that batteries need to be replaced. While it is possible that all batteries may need replace- ment, the batteries that will need replacement most often are the batteries in the car, followed by the remote controller, and then the control tower. - Page 6 This product contains small parts in its unassembled state. Adult assembly is required. Pegs Double Support • Position the handle support so the pegs are facing you. • With the checkered side facing down, fit the double flag on to the pegs on the handle support.
- Page 7 Pegs Remote Controller Holder • "Snap" the remote controller holder onto the tab on the bottom of the starting ramp, as shown. • Insert and "snap" the pegs on the bottom of the handle assembly into the matching holes in the starting ramp as shown. Assembly Handle Assembly...
- Page 8 Ramp Ramp Rail • Insert and "snap" the tabs on the ramp into the matching slots in a ramp rail. • Repeat this procedure to attach the other ramp rail. Assembly Ramp Tabs Hole Ramp Rail • Gently squeeze the ring of fire to insert the pegs on either end into the matching holes at the top of the ramp assembly,...
-
Page 9: Label Decoration
Label Decoration Proper label application will help keep labels looking their best! When applying labels, keep the following guidelines in mind: • Wash hands before applying labels. • Before applying labels, wipe the surface of the toy with a clean, dry cloth to remove dust or oils. - Page 10 Mode I - Beginner Driver Mode I is for a beginner or younger driver. Automatic Course Control always keeps the car hugging the track, even over obstacles. Just press the remote controller button to go and release to stop. Setting Up The Track Plug Hint: For best performance, use this toy on a smooth, flat surface.
- Page 11 Mode I - Beginner Driver Ring of Fire Ramp Crash Gate • Note the grooves on the edges of the crash gate, the ring of fire ramp and the dirt track. • Fit the grooves on these three obstacles onto the flexible track. Place the obstacles anywhere you like, but be sure to keep them on the outside of the track, as shown.
- Page 12 Mode I - Beginner Driver Let’s Go • Locate the reset switch on the back of the control tower. • Slide the reset switch ON . • Locate the ON/OFF button on the front of the control tower. • Press the ON/OFF button to turn the track and the control tower on.
- Page 13 Mode I - Beginner Driver Battery Installation Battery Installation Battery Installation Battery Installation Arrows • Note the arrows on the starting ramp. • Place rear wheels of the car on the starting ramp, making sure the car is pointing in the same direction as the arrows.
- Page 14 Mode II - Pro Driver Mode II is for a more experienced driver who has acquired better manual skills. In this mode, your child can take full control of steering and direction. For some challenging fun, your child can set up an off road course and use the remote controller wheel to steer around obstacles.
- Page 15 Mode II - Pro Driver • Turn the control tower power on to hear sound effects each time the car drives over the starting ramp. • Be sure the reset switch on the control tower is set to the on position •...
- Page 16 Storage Door • Lift the control tower storage compartment door. • Place the barrels, cones, hay bales and road flags into the control tower storage compart- ment and door. Close the door. Track • Remove the flexible track from both sides of the control tower. Storage •...
- Page 17 • Fit the dirt track to the crash gate as shown. Control Tower Dirt Track • Slide the edges of the dirt track into the grooves in the handle support and control tower. Storage Dirt Track Crash Gate Fire Ramp •...
- Page 18 Storage • Fit the stadium lights onto the track as shown. • Place the remote controller in the holder as shown. Care • Keep the car tires clean for best performance. • Wipe this toy with a clean cloth dampened with a mild soap and water solution.
-
Page 19: Troubleshooting Guide
Troubleshooting Guide Symptom Car moves very slowly In Mode I, the car runs closer and closer to the track; or car keeps hitting track Car responds intermittently to the remote controller Solution • Battery power in the car may be weak. Replace all four batteries with fresh, alkaline batteries. - Page 20 Troubleshooting Guide Symptom Car does not respond to the remote controller There are no sound effects when the car crosses the starting ramp Automatic Course Control feature is not working Solution • The car mode switch may be set to off O. Be sure the mode switch on the car is set to l or ll .
- Page 21 Troubleshooting Guide Symptom Car keeps sliding in the turns Car keeps turning in circles (Mode l) Solution • Try reducing speed in the turns by releasing the remote controller button. • Set the car to the slow speed setting • Be sure the flexible track layout does not have sharp bends.
-
Page 22: One (1) Year Limited Warranty
One (1) Year Limited Warranty Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York 14052, warrants that “Grow with Me ™ RC Rally” is free from all defects in material and workmanship when used under normal conditions for a period of one (1) year from the date or purchase. -
Page 23: Fcc Note (United States Only)
FCC Note (United States Only) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 24: Consumer Information
Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.