Table of Contents
Advertisement
:
21. Wrap the Medium Cable (23) around a 3 1/2"
Pulley (15). Attach the Pulley to the Top
Frame (55) with a 3/8" x 1 3/4" Bolt (87) and
....
Nyl
t (21)
a 3/8"
on Locknu
.
ii ¸¸
!_!i_!i_ _
Lii
22. Wrap the Medium Cable (23) around a 3 1/2"
Pulley (15). Attach the Pulley to the Top
Frame (55) with a 3/8" x 1 314" Bolt (87) and
a 3/8" Nylon Locknut (21).
i!_i ii ii
ii
il i!il ¸ i i!ii;
!i ¸ _:i
i_iiii!il
!_i ! i_!ii _i_
!!ili!!!ii!iiii_ii!i_i_i:i_:i
23, Attach the Medium Cable (23) to the Small
"U"-Bracket (67) with a 1/4" Nylon Locknut (2)
and a 1/4" Flat Washer (10), Do not com-
pletely tighten the Nylon Locknut. It
should be threaded onto the end of the
Cable only a couple of turns, as shown In
the Inset drawing.
24. Locate the Short Cable (58). Attach the
Short Cable to the Rear Upright (56) with a
5/16" x 3" Bolt (93), a 5/16" Flat Washer (8),
and two 5/16" Nylon Jam Nuts (84). The end
of the Cable must be between the two
Nylon Jam Nuts and there must be
enough room between the Nylon Jam Nuts
for the end of the Cable to pivot.
Wrap the Short Cable (58) around a 3 112"
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the Squat Arm (79) with a 3/8" x
3 3/4" Bolt (71), a 3/8" Flat Washer (9), and a
3/8" Nylon Lock Nut (21). The Cable Trap
must be turned to hold the Cable In place.
22
55
21
15
23
23
79
56
Page 11
Hide quick links:
Advertisement
Table of Contents
