Mowing; Headlights - Troy-Bilt Super Bronco Operator's Manual

Mowing
_ ARNING:Tohelp avoid blade contact or
a thrown object injury,keep bystanders,
helpers, children and pets at least 75feet
from the machine while it is in operation.
Stop machine if anyone enters the area.
Thefollowinginformation will be helpfulwhenusingthe
cuttingdeck with yourtractor:
WARNING: Plan your mowing pattern to
avoid discharge of materials toward roads,
sidewalks, bystanders and the like. Also,
avoid discharging material against a wall
or obstruction which may cause dis-
charged material to ricochet back toward
the operator.
Do not mowat high groundspeed,especiallyifa
mulchkit or grass collectoris installed.
Forbest resultsit is recommended that the firsttwo
laps be cut with the dischargethrowntowardsthe
center.After thefirst two laps, reversethedirectionto
throwthe dischargeto the outsidefor the balanceof
cutting.This will givea betterappearanceto the lawn.
* Do notcut the grasstoo short.Shortgrass invites
weedgrowthand yellowsquicklyin dryweather.
* Mowingshouldalwaysbe donewith the engineat full
throttle.
* Underheavierconditionsit may be necessaryto go
backoverthe cut areaa secondtime to get a clean
cut.
Do NOTattemptto mow heavybrushand weedsand
extremelytall grass.Yourtractoris designedto mow
lawns,NOTclearbrush.
Keepthe bladessharpand replacethe bladeswhen
worn. Referto Cutting Blades in the Maintaining
YourLawnTractorsectionof this manualfor proper
blade sharpeninginstructions.
Headlights
* The lampsare ON wheneverthe ignition key ismoved
out of the STOPposition.
* The lamps turn OFFwhenthe ignition key ismovedto
the STOPposition.
17
i
Operat ng
NOTE: It is not
necessary to remove
he discharge chute to
operate the mower with
the mulch kit installed.