Drill Master 68239 Manual

Drill Master 68239 Manual

18v cordless drill

Advertisement

18V Cordless Drill
68239 18V Cordless Drill
Read this material before using this product.
Failure to do so can result in serious injury.
Save this manual.
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken,
©
Copyright
2010 by Harbor Freight Tools
or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
please call 1-800-444-3353 as soon as possible.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape
Manual Revised 11c

Advertisement

Table of Contents
loading

Summary of Contents for Drill Master 68239

  • Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
  • Page 2: Specifications

    2. Electrical safety a. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Page 2 For technical questions, please call 1-800-444-3353. SKU 68239...
  • Page 3: Drill Safety Warnings

    Contact with a ″live″ wire will make exposed metal accessories, or storing power tools. Such parts of the tool ″live″ and shock the operator. preventive safety measures reduce the risk of starting the power tool accidentally. SKU 68239 For technical questions, please call 1-800-444-3353. Page 3...
  • Page 4: Vibration Safety

    6. Grip tool as lightly as possible (while still keeping of California] to cause cancer, birth defects or safe control of it). Let the tool do the work. other reproductive harm. Some examples of these Page 4 For technical questions, please call 1-800-444-3353. SKU 68239...
  • Page 5: Extension Cords

    Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) SKU 68239 For technical questions, please call 1-800-444-3353. Page 5...
  • Page 6: Instructions For Putting Into Use

    Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 1011. Keyless Chuck Torque Adjustment Ring Direction Switch Work Light Trigger Battery Switch Battery Button Battery Pack Page 6 For technical questions, please call 1-800-444-3353. SKU 68239...
  • Page 7: Tool Set Up

    Charger (or when removing it from the Drill). Torque Adjustment Ring to desire setting. a. The numbered speed settings from 1 to 20 are for driving screws, bolts and nuts. SKU 68239 For technical questions, please call 1-800-444-3353. Page 7...
  • Page 8: Maintenance And Servicing

    8. When finished using the Drill, release the Trigger and center the Direction Switch to lock the trigger mechanism as a safety measure. 9. Remove the Battery Pack. Page 8 For technical questions, please call 1-800-444-3353. SKU 68239...
  • Page 9: Troubleshooting

    4. Wear ANSI-approved safety goggles and NIOSH- approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. REV 11c SKU 68239 For technical questions, please call 1-800-444-3353. Page 9...
  • Page 10: Parts List And Assembly Diagram

    Steel Ball Upper Trim Strip Washer Reverse Switch Shaft Housing Trigger Gearbox Battery Terminal Shaft Tip Holder Runner Axle Red Wire Self-Locking Core Black Wire Self-Locking Circle Resistor Self-Locking Gear Holder Page 10 For technical questions, please call 1-800-444-3353. SKU 68239...
  • Page 11: Assembly Diagram

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 68239 For technical questions, please call 1-800-444-3353. Page 11...
  • Page 12: Limited 90-Day Warranty

    LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

Drillmaster 68287

Table of Contents