Ps Menu; Pdf Menu - Ricoh LD225 Function Manual

Printer Features

PS Menu

This menu appears only when the op-
tional PostScript 3 unit is installed.
❖ Data Format
You can select a data format.
• Binary Data
• TBCP
Limitation
❒ This setting is not effective when
operating the machine with a
parallel or EtherTalk connection.
❒ When operating the machine
with a parallel connection, and
5
also if the binary data is sent
from the printer driver, the
print job is canceled.
❒ When operating the machine
with an Ethernet connection,
the print job is canceled under
the following conditions;
• The printer driver data for-
mat is TBCP, and the data
format selected on the dis-
play panel is Binary Data.
• The printer driver data for-
mat is binary, and the data
format selected on the dis-
play panel is TBCP.
Note
❒ Default: TBCP
❖ Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
134

PDF Menu

This menu appears only when the op-
tional PostScript 3 Unit is installed.
❖ Change PDF Password
Set the password for the PDF file
executing PDF Direct Print.
• Current Password
• New Password
• Confirm New Password
A password can be set using on the
Web Image Monitor, but in this case
the password information is sent
through the network. If security is a
priority, set the password using this
menu from the Control Panel.
Note
❒ Default: Not Set
❖ PDF Group Password
Set the group password already
specified with DeskTopBinder
Lite.
• Current Password
• New Password
• Confirm New Password
A password can be set using on the
Web Image Monitor, but in this case
the password information is sent
through the network. If security is a
priority, set the password using this
menu from the Control Panel.
Note
❒ Default: Not Set
❖ Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpii