2. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 68152...
Turn off and detach the air supply, safely discharge any residual air pressure, and release the throttle and/or turn the switch to its off position before leaving the work area. Item 68152 For technical questions, please call 1-800-444-3353. Page 3...
These carry important safety information. Depending on application, use face If unreadable or missing, contact shield, safety goggles or safety glasses. Harbor Freight Tools for a replacement. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron Item 68152 For technical questions, please call 1-800-444-3353.
Page 6
5. Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control. Page 6 For technical questions, please call 1-800-444-3353. Item 68152...
(such as tingling, tool as explained in this manual. numbness, and white or blue fingers), seek If abnormal vibration occurs, medical advice as soon as possible. stop immediately. SAVE THESE INSTRUcTIONS. Item 68152 For technical questions, please call 1-800-444-3353. Page 7...
* Maximum speed at stated maximum air pressure. Excess air pressure is hazardous and may cause the tool to exceed stated maximum speed. components and controls Trigger Air Inlet Air Regulator 6" Backing Drive Spindle Page 8 For technical questions, please call 1-800-444-3353. Item 68152...
Note: Air flow, and therefore tool the tool is disconnected and unpowered. performance, can be hindered by undersized air supply components. Item 68152 For technical questions, please call 1-800-444-3353. Page 9...
Drive Spindle. Then turn the (Pressure Sensitive Adhesive) sanding Spindle Lock back, allowing the Drive discs (sold separately). Firmly attach Spindle to freely turn. See Figure C. the sanding disc to the Backing Pad. Page 12 For technical questions, please call 1-800-444-3353. Item 68152...
Page 13
The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Item 68152 For technical questions, please call 1-800-444-3353. Page 13...
7. Move the Sander in a uniform pattern up and tool with a clean, dry cloth. Then store the tool indoors out of children’s reach. down or side to side to ensure even sanding. Page 14 For technical questions, please call 1-800-444-3353. Item 68152...
Sander will spin rather than randomly orbit. Tool Disassembly, cleaning, and Inspection: Have the internal mechanism cleaned, inspected, and lubricated by a qualified technician. If the vanes need replacement, replace them all as a set. Item 68152 For technical questions, please call 1-800-444-3353. Page 15...
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Accessory List Item/ Description Function part* 6" PSA Sanding Disc Sanding operations *Item or part number may not be available for some accessories. Page 16 For technical questions, please call 1-800-444-3353. Item 68152...
Page 17
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 68152 For technical questions, please call 1-800-444-3353. Page 17...
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.