Chicago Electric 91852 Assembly And Operating Instructions Manual page 14

9. Unscrew and remove the Hex Head Bolt (1). Then, remove the Spindle Washer
(2) and Flange (3). (See Figure I.)
Release pressure on the Safety Lock Grip (42). (See Figure H.)
10.
11. Wearing heavy duty work gloves to avoid accidental cuts, remove the old Saw
Blade (4). (See Figure J.)
12. Install the new Saw Blade (4), making sure the teeth of the Saw Blade are point-
ing downward. (See Figure D.)
13. Reassemble the Flange (3), Spindle Washer (2), and Hex Head Bolt (1) firmly.
(See Figure I.)
14. Swing the Center Cover (56) back in place, making sure the Blade Guard (72)
covers the Saw Blade (4). (See Figure G.)
Reinstall the Screw (62), and retighten the Screw (57). (See Figure F.)
15.
16. Make sure the Blade Guard (72) returns to its original position prior to operating
the Miter Saw.
CAUTION! Make sure to pull out on the Knob (124). Turn the Knob 90
17.
degrees. Then, insert the Knob into the shallow slot in its unlocked posi-
tion. NEVER use the Knob in any cutting operation.
For technical questions, please call 1-800-444-3353.
SKU 91852
FLANGE
FIGURE I
(3)
FIGURE J
SPINDLE
WASHER
(2)
HEAD BOLT
SAW BLADE
(4)
HEX
(1)
PAGE 14