Download Print this page
First Alert SA710B Specifications
First Alert SA710B Specifications

First Alert SA710B Specifications

9v battery powered

Advertisement

Quick Links

S M O K E
A L A R M
SA710B/AB
CAT.
PHOTOELECTRIC
Photoelectric smoke sensing technology
for optimal sensing of smoke particles
produced in smoldering fires. Helps
reduce false alarms like those caused
by cooking smoke and shower steam.
OPTIPATH 360
TECHNOLOGY
Provides 360 degrees of direct access
to the smoke sensing chambers
SILENCE FEATURE
Silences and tests alarm with a single
button.
TWO LOCKING
FEATURES
Pins are provided to lock battery drawer
and/or alarm to base. Perfect for
apartment, dormitory or hotel
applications.
EASY ACCESS
BATTERY DRAWER
Available in the following versions:
SA710B
Carbon Zinc Battery
SA710AB Extended Life Alkaline Battery
9V Battery Powered
Description:
First Alert Model SA710 is a battery operated single station photoelectric smoke
alarm specifically designed for residential and institutional applications including
sleeping rooms of hospitals, hotels, motels, dormitories, and other multifamily
dwellings as defined in standard NFPA 101. Model SA710 has been fully tested
and complies with, UL217, CSFM, NFPA 72, and NFPA 101 and other agencies
that model their codes after the above agencies. It meets building codes where
battery operated photoelectric with Silence smoke alarms are required and with
model building codes published by the ICC.
First Alert Model SA710 is a state of the art smoke alarm designed to provide
early warning of a fire. It features a photoelectric smoke sensing chamber, an
85dB horn, a supervised 9V battery power supply (cat. no. SA710AB features an
extended life alkaline battery), a single button test/silence switch, a silence
feature to silence unwanted nuisance alarms, a red LED light that indicates DC
TM
power or alarm. Optipath 360 technology
to the smoke sensing chamber. It also features tamper resistant locking pins that
lock the alarm to the mounting bracket and/or the battery drawer to prevent
removal of battery. Battery installation and removal can occur while the unit is
mounted to the ceiling or wall via the slide out battery drawer. When battery
power drops to a pre-set warning level, the horn will "chirp" approximately once
per minute to indicate a fresh battery is needed. Designed for wall or ceiling
mounting. Includes mounting anchors and screws.
Listed to
UL 217
Standard
provides 360 degrees of direct access
TM

Advertisement

loading

Summary of Contents for First Alert SA710B

  • Page 1 Silence smoke alarms are required and with model building codes published by the ICC. First Alert Model SA710 is a state of the art smoke alarm designed to provide early warning of a fire. It features a photoelectric smoke sensing chamber, an 85dB horn, a supervised 9V battery power supply (cat.
  • Page 2 A R C H I T E C T U R A L A N D E N G I N E E R I N G S P E C The smoke alarm shall be a First Alert Model SA710B (carbon zinc battery) or SA710AB (alkaline battery) and shall provide at a minimum the following features and functions: 1.

This manual is also suitable for:

Sa710abSa710