Ptz (Option) - First Alert HS-4700-S User Manual

Operating Menus
Model HS-4700-S User's Manual
APPLY TO
OK
CANCEL
PTZ ( )
OPTION
The PTZ is an optional feature available on some cameras. This feature is not available on
the cameras supplied with the HS-4700-S system, but the system software is PTZ-ready.
Access PTZ (Pan Configure) from the Main Menu. Use this menu to select the address,
protocol, and baud rate for each camera.
Channel
Method
Protocols
Baud Rate
APPLY TO
OK
CANCEL
Apply the current channel option settings to
another channel. Select the choice box to apply the
channel number and click the APPLY TO button.
Click to save system setup parameters and return to
the Main Menu.
Click to keep existing system setup options and
return to the Main Menu
Channel CH1
Address 01
Protocol Pelco-D
Baudrate 4800
CH1
APPLY TO
OK
Select a channel, 1, 2, 3, or 4.
PTZ communication address settings: range is 00-
99. To use this address, it must be the same as the
PTZ address setting.
PTZ communication protocols are: Pelco-D,
Pelco-P, B01, and Samsung.
PTZ baud rate settings are: 1200 /2 400 / 4800 /
9600 / 19200 / 38400 / 57600 / 115200.
Apply the current channel options settings to
another channel. Select the choice box of the
channel number to the applied, and click the
APPLY TO button.
Click to save system setup options and return to
Main Menu.
Click to keep existing system setup options and
return to Main Menu.
21
CANCEL