If you are using another set of headphones other than the supplied
Jabra model, please note that differences in impedance and
sensitivity might limit or increase the maximum volume output
level . an impedance level of 6 ohm is recommended for the best
performance . however, always use extra precaution when using
another set of headphones than the original Jabra model .
WhAT ThE LighTS MEAN
The Jabra logo is an indicator light showing the headset status .
blue indicates that the unit is operating . Purple indicates you are
listening to music . Green signals that your headset is fully charged,
yellow 70% charged and red signals that your power is low .
What you see
solid light:
slow single flash:
slow double flash:
slow triple flash:
Quick double flash:
Triple flash:
5 quick flashes:
* bT3030 is equipped with Jabra discreet light feature, meaning
that light indicator (led) turns off after min of non-activity .
headset is still active, and light will flash again after a tap on the
answer/end button or any call activity .
Jabra bT3030 blueTooTh headseT
What it means
In pairing mode – see Pairing
section
connected to phone and in
standby mode
connected to phone and
active on call*
not connected to phone and
standby mode*
Incoming/outgoing call
headset on but not connected
to phone*
Pairing succeeded*
0