Important Information; Installation Procedures; Tools - Hunter 44860 Installation And Operation Manual

IMPORTANT INFORMATION

This thermostat is designed to work on the following heating and cooling
systems:
Up to 2 Stage Heat/2 Stage Cool
Heat Only or Cool Only Systems
Single and Multi-Stage Heat Pumps
Gas, Electric or Oil Systems
This thermostat is not designed for use with 110V/220 V systems. If you
are unsure of what kind of heating and cooling system you have, please
contact a qualified HVAC Technician for assistance.

INSTALLATION PROCEDURES

TOOLS

This thermostat includes two #8 slotted screws and two wall anchors
for mounting. To install your new thermostat, you will need the following
supplies:
4
Millivolt Systems
2-wire Hydronic Systems
AC or Hard-wired
44002-01 R111809