Ritron RadioNexus Solution Manual

IP INTEROPERABILITY SOLUTION
Achieve a new level of interoperability and increase communication, safety and productivity by expanding your
existing IP network to include your LMR two-way radio users (RoIP).
The Ritron RadioNexus™ network-ready LMR base station transceiver is available in VHF and UHF frequency
band models. A built-in RJ-45 connector and Type 3 E&M analog interface allows easy connection to the IP
network using a simple router or VoIP gateway.
When connected to the IP network via a router or VoIP gateway the Ritron RadioNexus™ enables compatible
LMR radios to communicate across the IP network to any other networked device (i.e. PC, laptop, IP phone, cell
Markets:
•
Local, State, and Federal Government
•
Businesses
•
Schools, Colleges, Universities
•
Retail Operations
For over 27 years, Ritron has been designing and manufacturing a wide range of wireless solutions. They include portable and mobile 2-way
r adios, base stations, radio extender repeaters, radio callboxes, telemetry systems, voice alarm reporters and OEM transceivers.
Ritron recommends a supported Cisco router model 2651XM, 3725 or 3745
For enhanced communication capability with other network devices and LMR radios, Ritron recommends the WAVE (Wide Area
Voice Environment) software application from Twisted Pair Solutions. For a whitepaper on LMR integration go to
http://www.twistpair.com/inc/data/Application%20Brief/wave-app-ab-8.5x11.pdf
505 W. Carmel Drive · Carmel, IN 46032
317-846-1201 · Fax: 317-846-4978
Email: ritron@ritron.com
www.ritron.com
phone) including two-way radios regardless of make, model,
frequency
hardware/software may be required at opposite end). For
even greater talk range and/or increased penetration in and
around
programmed to communicate with a radio repeater.
For maximum compatibility with other LMR radios the Ritron
RadioNexus™ can be programmed to work with virtually any
brand of VHF or UHF business band radios. Features include:
PC
construction, 2 Watt transmitter, Automatic "ON" feature,
CTCSS or DCS signaling, wide or narrow band operation,
BNC connector for external antenna, local speaker, local
microphone jack, small and compact size (only 1.4"H x 3.8"W
x 5.6" L), wall or desk mountable, 110 VAC or 12 VDC
operation.
with the following installed options NM-HD-2V, VIC2-2E&M.
band or signaling
buildings, the RadioNexus™
programmability, rugged,
VHF "License-Free" models are available
format (equivalent
can even be
all-steel, heavy-duty