INSTALLATION
OUTBOARD MDTOR ATTACHMENT
Attach the stern bracketJo the Van-
som and tighten the clamp screws.
Before operating the bdat, check
the tightness of the clamp screws.
Tie a rope through the hole in the
stern bracketandsecure the other
end of the rope to the boat. This
willpreventaccidentallossofthe
motor.
The holes in the clamp screw
handles may be padlocked to-
gether to prevent theft of the
motor.
/
CLAMP SCREW
SAFETY ROPE
MOTOR ANGLE FOR CRUISING
Adjust the motor so the propeller shaft is parallel with the water surface.
INCORRECT
INCORRECT
CAUSES BOAT TO
CAUSES BOAT TO
"SQUAT"
"PLOW"
CORRECT
GIVES MAXIMUM
PERFORMANCE
20